Torex Semiconductor Ltd
Изображение может быть репрезентативным.
Подробную информацию о продукте см. в характеристиках.
XC6108C11CGR-G
Посмотреть детали Таблицы данных

XC6108C11CGR-G

Product Overview

Category

XC6108C11CGR-G belongs to the category of voltage regulators.

Use

It is primarily used for voltage regulation in electronic circuits.

Characteristics

  • Package: CGR (SOT-89)
  • Essence: Voltage regulator IC
  • Packaging/Quantity: Tape and reel, 3000 units per reel

Specifications

The specifications of XC6108C11CGR-G are as follows:

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage: 1.1V
  • Output Current: 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 40µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6108C11CGR-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

The functional features of XC6108C11CGR-G include:

  • Low dropout voltage
  • Low quiescent current
  • Overcurrent protection
  • Thermal shutdown protection
  • Short-circuit protection

Advantages and Disadvantages

Advantages: - Low dropout voltage ensures efficient voltage regulation. - Low quiescent current minimizes power consumption. - Overcurrent, thermal shutdown, and short-circuit protections enhance reliability.

Disadvantages: - Limited output current capacity (150mA).

Working Principles

XC6108C11CGR-G works by regulating the input voltage to a stable output voltage of 1.1V. It achieves this through internal circuitry that adjusts the voltage based on feedback from the output. The device maintains a low dropout voltage and operates within a specified temperature range.

Detailed Application Field Plans

XC6108C11CGR-G finds applications in various electronic devices and circuits, including but not limited to: - Battery-powered devices - Portable electronics - IoT devices - Wearable devices - Embedded systems

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6108C11CGR-G are: - LM1117-1.1 - MCP1700-1102E/TO - LP2985-33DBVR

These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.

In conclusion, XC6108C11CGR-G is a voltage regulator IC with low dropout voltage, low quiescent current, and various protection features. It is commonly used in battery-powered and portable electronic devices, among others. While it has a limited output current capacity, there are alternative models available for different application needs.

Перечислите 10 распространенных вопросов и ответов, связанных с применением XC6108C11CGR-G в технических решениях.

Sure! Here are 10 common questions and answers related to the application of XC6108C11CGR-G in technical solutions:

  1. Question: What is XC6108C11CGR-G?
    - Answer: XC6108C11CGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.

  2. Question: What is the operating voltage range of XC6108C11CGR-G?
    - Answer: The operating voltage range of XC6108C11CGR-G is typically between 0.9V and 6.0V.

  3. Question: What is the purpose of using XC6108C11CGR-G in a technical solution?
    - Answer: XC6108C11CGR-G is commonly used to ensure proper system initialization and reliable operation by monitoring the power supply voltage and generating a reset signal when necessary.

  4. Question: How does XC6108C11CGR-G detect the power supply voltage?
    - Answer: XC6108C11CGR-G uses an internal voltage reference and a comparator to compare the input voltage with a preset threshold. If the input voltage drops below this threshold, it triggers the reset signal.

  5. Question: Can XC6108C11CGR-G be used in battery-powered applications?
    - Answer: Yes, XC6108C11CGR-G can be used in battery-powered applications as it has a low quiescent current consumption, making it suitable for power-sensitive designs.

  6. Question: What is the output type of XC6108C11CGR-G?
    - Answer: XC6108C11CGR-G has an open-drain output, which means it can be connected to other devices or microcontrollers with a pull-up resistor to generate the reset signal.

  7. Question: What is the typical reset voltage threshold of XC6108C11CGR-G?
    - Answer: The typical reset voltage threshold of XC6108C11CGR-G is 2.93V, but it can be adjusted using external resistors if needed.

  8. Question: Is XC6108C11CGR-G suitable for automotive applications?
    - Answer: Yes, XC6108C11CGR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 3 qualification standards, ensuring high reliability and performance in harsh environments.

  9. Question: Can XC6108C11CGR-G be used in industrial control systems?
    - Answer: Absolutely! XC6108C11CGR-G is commonly used in industrial control systems to monitor power supply voltages and ensure stable operation of critical equipment.

  10. Question: Are there any specific precautions to consider when using XC6108C11CGR-G?
    - Answer: It is important to follow the recommended operating conditions and guidelines provided in the datasheet of XC6108C11CGR-G. Additionally, proper decoupling capacitors should be used near the IC to minimize noise and ensure reliable operation.