Torex Semiconductor Ltd
Изображение может быть репрезентативным.
Подробную информацию о продукте см. в характеристиках.
XC6108C25CGR-G
Посмотреть детали Таблицы данных

XC6108C25CGR-G

Product Overview

Category

XC6108C25CGR-G belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Compact size
  • High precision
  • Low power consumption
  • Wide input voltage range
  • Overcurrent protection
  • Thermal shutdown protection

Package

XC6108C25CGR-G is available in a small SOT-89 package.

Essence

The essence of XC6108C25CGR-G lies in its ability to provide stable and regulated voltage output for various electronic devices.

Packaging/Quantity

It is typically sold in reels, with each reel containing a specific quantity of XC6108C25CGR-G units.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 2.5V
  • Output Current: 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6108C25CGR-G has three pins:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin

Functional Features

  • Voltage regulation: XC6108C25CGR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It safeguards the circuit by limiting the current when it exceeds a certain threshold.
  • Thermal shutdown protection: In case of excessive temperature, the regulator shuts down to prevent damage.

Advantages and Disadvantages

Advantages

  • Small form factor allows for easy integration into compact designs.
  • High precision ensures accurate voltage regulation.
  • Low power consumption helps conserve energy.
  • Wide input voltage range provides flexibility in various applications.

Disadvantages

  • Limited output current capacity may not be suitable for high-power devices.
  • Dropout voltage may cause a slight voltage drop across the regulator.

Working Principles

XC6108C25CGR-G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a constant output voltage, compensating for any variations in the input voltage.

Detailed Application Field Plans

XC6108C25CGR-G finds applications in various electronic devices, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Wearable devices - Automotive electronics

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6108C25CGR-G are: - LM1117-2.5 - MCP1700-2502E/TO - TS2937CP-2.5

These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.

Word count: 314 words

Перечислите 10 распространенных вопросов и ответов, связанных с применением XC6108C25CGR-G в технических решениях.

Sure! Here are 10 common questions and answers related to the application of XC6108C25CGR-G in technical solutions:

  1. Question: What is XC6108C25CGR-G?
    - Answer: XC6108C25CGR-G is a voltage detector IC (Integrated Circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.

  2. Question: What is the operating voltage range of XC6108C25CGR-G?
    - Answer: The operating voltage range of XC6108C25CGR-G is typically between 0.9V and 6.0V.

  3. Question: How does XC6108C25CGR-G help in technical solutions?
    - Answer: XC6108C25CGR-G helps in technical solutions by providing a reliable reset signal to microcontrollers, DSPs, or other digital devices when the power supply voltage drops below a specified level, ensuring proper system initialization.

  4. Question: What is the output type of XC6108C25CGR-G?
    - Answer: XC6108C25CGR-G has an open-drain output type, which means it can be connected to other devices with a pull-up resistor to achieve different logic levels.

  5. Question: What is the typical reset threshold voltage of XC6108C25CGR-G?
    - Answer: The typical reset threshold voltage of XC6108C25CGR-G is 2.5V.

  6. Question: Can XC6108C25CGR-G be used in battery-powered applications?
    - Answer: Yes, XC6108C25CGR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.

  7. Question: Does XC6108C25CGR-G have any built-in delay time for the reset signal?
    - Answer: Yes, XC6108C25CGR-G has a built-in delay time of typically 200ms to ensure stable power supply voltage before releasing the reset signal.

  8. Question: Can XC6108C25CGR-G be used in automotive applications?
    - Answer: Yes, XC6108C25CGR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.

  9. Question: What is the package type of XC6108C25CGR-G?
    - Answer: XC6108C25CGR-G is available in a compact SOT-25 package.

  10. Question: Is XC6108C25CGR-G RoHS compliant?
    - Answer: Yes, XC6108C25CGR-G is RoHS (Restriction of Hazardous Substances) compliant, ensuring it meets environmental regulations.

Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications of XC6108C25CGR-G.