Torex Semiconductor Ltd
Изображение может быть репрезентативным.
Подробную информацию о продукте см. в характеристиках.
XC6119C10ANR-G
Посмотреть детали Таблицы данных

XC6119C10ANR-G

Product Overview

Category

XC6119C10ANR-G belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for voltage regulation and power management.

Characteristics

  • Voltage regulation capabilities
  • Power management features
  • Compact size
  • High efficiency
  • Low power consumption

Package

XC6119C10ANR-G is available in a small surface-mount package, which makes it suitable for compact electronic devices.

Essence

The essence of XC6119C10ANR-G lies in its ability to regulate voltage and manage power efficiently, ensuring stable and reliable operation of electronic devices.

Packaging/Quantity

This product is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 1.0V
  • Output Current: 100mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6119C10ANR-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Voltage regulation: XC6119C10ANR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It incorporates overcurrent protection to safeguard the connected circuitry.
  • Thermal shutdown: In case of excessive temperature, the device shuts down to prevent damage.
  • Low quiescent current: The low quiescent current minimizes power consumption when the device is idle.

Advantages and Disadvantages

Advantages

  • High efficiency: XC6119C10ANR-G offers high efficiency in voltage regulation, resulting in minimal power loss.
  • Compact size: Its small form factor makes it suitable for space-constrained applications.
  • Wide operating temperature range: It can operate reliably in a wide temperature range, making it versatile.

Disadvantages

  • Limited output current: The maximum output current of 100mA may not be sufficient for high-power applications.
  • Dropout voltage: The dropout voltage of 200mV may affect the performance in low input voltage scenarios.

Working Principles

XC6119C10ANR-G utilizes internal circuitry to regulate the output voltage. It compares the feedback voltage with a reference voltage and adjusts the internal control circuit accordingly to maintain a stable output voltage.

Detailed Application Field Plans

XC6119C10ANR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to XC6119C10ANR-G are: - XC6119C12ANR-G: Output voltage of 1.2V - XC6119C15ANR-G: Output voltage of 1.5V - XC6119C18ANR-G: Output voltage of 1.8V

These alternative models provide flexibility in choosing the desired output voltage for specific applications.

Word count: 410 words

Перечислите 10 распространенных вопросов и ответов, связанных с применением XC6119C10ANR-G в технических решениях.

Sure! Here are 10 common questions and answers related to the application of XC6119C10ANR-G in technical solutions:

  1. Q: What is XC6119C10ANR-G? A: XC6119C10ANR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.

  2. Q: What is the operating voltage range of XC6119C10ANR-G? A: The operating voltage range of XC6119C10ANR-G is typically between 0.8V and 6.0V.

  3. Q: How does XC6119C10ANR-G help in technical solutions? A: XC6119C10ANR-G helps in technical solutions by providing a reliable way to monitor the power supply voltage and initiate a reset or shutdown sequence when the voltage falls below a specified level, ensuring proper system operation.

  4. Q: What is the output type of XC6119C10ANR-G? A: XC6119C10ANR-G has an open-drain output type, which means it can be connected to other devices or microcontrollers for further processing.

  5. Q: What is the typical reset threshold voltage of XC6119C10ANR-G? A: The typical reset threshold voltage of XC6119C10ANR-G is 1.0V.

  6. Q: Can XC6119C10ANR-G be used in battery-powered applications? A: Yes, XC6119C10ANR-G can be used in battery-powered applications as it operates within a wide voltage range and consumes very low quiescent current.

  7. Q: Does XC6119C10ANR-G have any built-in delay time for the reset signal? A: Yes, XC6119C10ANR-G has a built-in delay time of approximately 200ms to ensure stable power supply before releasing the reset signal.

  8. Q: Can XC6119C10ANR-G be used in automotive applications? A: Yes, XC6119C10ANR-G is suitable for automotive applications as it meets the necessary requirements such as wide operating voltage range and temperature range.

  9. Q: What is the package type of XC6119C10ANR-G? A: XC6119C10ANR-G is available in a SOT-23-5 package, which is compact and widely used in various electronic devices.

  10. Q: Are there any application notes or reference designs available for XC6119C10ANR-G? A: Yes, the manufacturer provides application notes and reference designs that can help in understanding and implementing XC6119C10ANR-G in different technical solutions.