Подробную информацию о продукте см. в характеристиках.
XC6121A617MR-G
Product Overview
Category
XC6121A617MR-G belongs to the category of voltage regulators.
Use
It is used to regulate and stabilize voltage in electronic circuits.
Characteristics
- Input Voltage Range: 2.5V to 6.0V
- Output Voltage Range: 1.2V to 5.5V
- Maximum Output Current: 200mA
- Low Dropout Voltage: 150mV at 100mA
- Low Quiescent Current: 30µA (typical)
- Package Type: SOT-23-5
- Essence: Voltage regulation and stabilization
Packaging/Quantity
XC6121A617MR-G is available in a SOT-23-5 package. It is typically sold in reels containing a specific quantity, such as 3000 units per reel.
Specifications
- Input Voltage Range: 2.5V to 6.0V
- Output Voltage Range: 1.2V to 5.5V
- Maximum Output Current: 200mA
- Dropout Voltage: 150mV at 100mA
- Quiescent Current: 30µA (typical)
- Operating Temperature Range: -40°C to +85°C
- Package Type: SOT-23-5
Detailed Pin Configuration
XC6121A617MR-G has the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- EN: Enable pin
- NC: No connection pin
- VOUT: Output voltage pin
Functional Features
- Voltage regulation and stabilization
- Low dropout voltage for efficient power conversion
- Low quiescent current for power-saving operation
- Enable pin for control over the regulator's output
Advantages and Disadvantages
Advantages
- Wide input voltage range allows for flexibility in various applications
- Low dropout voltage ensures efficient power conversion
- Low quiescent current enables power-saving operation
- Enable pin provides control over the regulator's output
Disadvantages
- Maximum output current of 200mA may limit its use in high-power applications
Working Principles
XC6121A617MR-G operates based on the principle of linear voltage regulation. It uses a feedback mechanism to maintain a stable output voltage regardless of variations in the input voltage or load conditions. The internal circuitry of the regulator adjusts the output voltage by controlling the flow of current through a pass transistor.
Detailed Application Field Plans
XC6121A617MR-G can be used in various electronic applications, including but not limited to: - Battery-powered devices - Portable electronics - IoT devices - Wearable devices - Consumer electronics
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to XC6121A617MR-G are: - XC6206P332MR-G - XC6220B332MR-G - XC6219B332MR-G - XC6220C332MR-G - XC6220D332MR-G
These models offer similar voltage regulation capabilities and package options, providing alternatives for different design requirements.
Word count: 334 words
Перечислите 10 распространенных вопросов и ответов, связанных с применением XC6121A617MR-G в технических решениях.
Sure! Here are 10 common questions and answers related to the application of XC6121A617MR-G in technical solutions:
Q1: What is XC6121A617MR-G? A1: XC6121A617MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.
Q2: What is the operating voltage range of XC6121A617MR-G? A2: The operating voltage range of XC6121A617MR-G is from 0.8V to 6.0V.
Q3: What is the output type of XC6121A617MR-G? A3: XC6121A617MR-G has an open-drain output type, which means it can be connected to other devices or circuits to indicate a specific voltage level.
Q4: What is the typical quiescent current consumption of XC6121A617MR-G? A4: The typical quiescent current consumption of XC6121A617MR-G is around 1.0µA, making it suitable for low-power applications.
Q5: Can XC6121A617MR-G be used for overvoltage detection? A5: No, XC6121A617MR-G is specifically designed for undervoltage detection. It monitors the voltage level and provides an output signal when the voltage drops below a certain threshold.
Q6: What is the accuracy of the undervoltage detection threshold in XC6121A617MR-G? A6: The accuracy of the undervoltage detection threshold in XC6121A617MR-G is typically ±2%.
Q7: Does XC6121A617MR-G have built-in hysteresis? A7: Yes, XC6121A617MR-G has built-in hysteresis, which helps to prevent output oscillation near the detection threshold.
Q8: Can XC6121A617MR-G be used in automotive applications? A8: Yes, XC6121A617MR-G is AEC-Q100 qualified, making it suitable for automotive applications that require high reliability and quality standards.
Q9: What is the temperature range of XC6121A617MR-G? A9: The temperature range of XC6121A617MR-G is from -40°C to +85°C, allowing it to operate in a wide range of environments.
Q10: Is XC6121A617MR-G available in different package options? A10: Yes, XC6121A617MR-G is available in a SOT-25 package, which is a small surface-mount package commonly used in electronic devices.
Please note that these answers are based on general information about XC6121A617MR-G. It is always recommended to refer to the datasheet or consult with the manufacturer for specific technical details and application requirements.