Изображение может быть репрезентативным.
Подробную информацию о продукте см. в характеристиках.
XC6121F716MR-G

XC6121F716MR-G

Product Overview

Category

XC6121F716MR-G belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Small size and low profile package
  • Low dropout voltage
  • High output voltage accuracy
  • Low quiescent current
  • Overcurrent protection
  • Thermal shutdown protection

Package

XC6121F716MR-G is available in a small and compact package.

Essence

The essence of XC6121F716MR-G lies in its ability to regulate voltage efficiently and reliably.

Packaging/Quantity

XC6121F716MR-G is typically packaged in reels or tubes, with a specific quantity per package.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage Range: 1.2V - 5.5V
  • Output Current: Up to 200mA
  • Dropout Voltage: 150mV (typical)
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6121F716MR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. EN: Enable pin (optional)

Functional Features

  • Voltage regulation: XC6121F716MR-G ensures a stable output voltage within the specified range.
  • Overcurrent protection: It safeguards the circuit by limiting the output current during excessive load conditions.
  • Thermal shutdown protection: In case of excessive temperature, the device shuts down to prevent damage.

Advantages and Disadvantages

Advantages

  • Small size and low profile make it suitable for space-constrained applications.
  • Low dropout voltage minimizes power loss.
  • High output voltage accuracy ensures precise regulation.
  • Low quiescent current reduces power consumption.

Disadvantages

  • Limited output current capacity (up to 200mA).
  • Restricted input and output voltage ranges.

Working Principles

XC6121F716MR-G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage, compensating for load variations and input voltage changes.

Detailed Application Field Plans

XC6121F716MR-G finds applications in various electronic devices, including but not limited to: - Portable consumer electronics - Battery-powered devices - IoT devices - Wearable devices - Automotive electronics

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6121F716MR-G are: - XC6121F716ML-G - XC6121F716MR-GP - XC6121F716MR-GT - XC6121F716MR-GU

These models offer similar functionality and characteristics, providing flexibility in design choices.

Word count: 335 words

Перечислите 10 распространенных вопросов и ответов, связанных с применением XC6121F716MR-G в технических решениях.

Sure! Here are 10 common questions and answers related to the application of XC6121F716MR-G in technical solutions:

Q1: What is XC6121F716MR-G? A1: XC6121F716MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

Q2: What is the operating voltage range of XC6121F716MR-G? A2: The operating voltage range of XC6121F716MR-G is from 0.8V to 6.0V.

Q3: What is the output type of XC6121F716MR-G? A3: XC6121F716MR-G has an open-drain output type, which means it can be connected to other devices or circuits for further processing.

Q4: What is the typical quiescent current consumption of XC6121F716MR-G? A4: The typical quiescent current consumption of XC6121F716MR-G is around 1.0µA.

Q5: How does XC6121F716MR-G detect voltage levels? A5: XC6121F716MR-G detects voltage levels by comparing the input voltage with a fixed threshold voltage internally set within the IC.

Q6: Can XC6121F716MR-G be used for undervoltage detection? A6: Yes, XC6121F716MR-G can be used for undervoltage detection. It can monitor the input voltage and provide an output signal when it falls below a certain threshold.

Q7: What is the accuracy of the voltage detection in XC6121F716MR-G? A7: The accuracy of voltage detection in XC6121F716MR-G is typically ±1.5%.

Q8: Can XC6121F716MR-G be used in battery-powered applications? A8: Yes, XC6121F716MR-G can be used in battery-powered applications as it has a low quiescent current consumption, making it suitable for power-sensitive devices.

Q9: Does XC6121F716MR-G have built-in hysteresis? A9: Yes, XC6121F716MR-G has built-in hysteresis, which helps to prevent output oscillation when the input voltage is near the threshold level.

Q10: What is the package type of XC6121F716MR-G? A10: XC6121F716MR-G is available in a small SOT-25 package, which is compact and suitable for space-constrained applications.

Please note that these answers are general and may vary depending on the specific application and requirements.