Torex Semiconductor Ltd
Изображение может быть репрезентативным.
Подробную информацию о продукте см. в характеристиках.
XC6122C231MG-G
Посмотреть детали Таблицы данных

XC6122C231MG-G

Product Overview

Category

XC6122C231MG-G belongs to the category of voltage regulators.

Use

It is commonly used for regulating voltage in electronic circuits.

Characteristics

  • Voltage regulation capability
  • Compact size
  • Low power consumption
  • Wide input voltage range

Package

XC6122C231MG-G is available in a small surface-mount package.

Essence

The essence of XC6122C231MG-G lies in its ability to provide stable and regulated voltage output.

Packaging/Quantity

The product is typically packaged in reels or tubes, with a quantity of 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 2.3V
  • Output Current: 200mA
  • Dropout Voltage: 150mV (typical)
  • Quiescent Current: 40μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6122C231MG-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Voltage regulation: XC6122C231MG-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: The device includes built-in protection against excessive current flow.
  • Thermal shutdown: In case of overheating, the regulator shuts down to prevent damage.

Advantages and Disadvantages

Advantages

  • Small form factor allows for easy integration into compact designs.
  • Low power consumption helps conserve energy.
  • Wide input voltage range provides flexibility in various applications.

Disadvantages

  • Limited output current may not be suitable for high-power applications.
  • Dropout voltage may cause a slight voltage drop across the regulator.

Working Principles

XC6122C231MG-G operates based on a voltage regulation principle known as a linear regulator. It uses a feedback mechanism to maintain a constant output voltage, compensating for changes in input voltage and load conditions.

Detailed Application Field Plans

XC6122C231MG-G finds applications in various electronic devices, including but not limited to: - Portable consumer electronics - Battery-powered devices - IoT (Internet of Things) devices - Wearable technology - Embedded systems

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6122C231MG-G are: - XC6122C231RG-G - XC6122C231NG-G - XC6122C231PG-G - XC6122C231SG-G

These models offer similar functionality and specifications, providing options for different design requirements.

Word count: 346 words

Перечислите 10 распространенных вопросов и ответов, связанных с применением XC6122C231MG-G в технических решениях.

Sure! Here are 10 common questions and answers related to the application of XC6122C231MG-G in technical solutions:

  1. Question: What is XC6122C231MG-G?
    Answer: XC6122C231MG-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is used to monitor the voltage level of a power supply and provide an output signal when the voltage falls below a certain threshold.

  2. Question: What is the operating voltage range of XC6122C231MG-G?
    Answer: The operating voltage range of XC6122C231MG-G is typically between 0.8V and 6.0V.

  3. Question: How does XC6122C231MG-G work?
    Answer: XC6122C231MG-G works by comparing the input voltage with a reference voltage. When the input voltage drops below the reference voltage, it triggers an internal circuit that generates an output signal.

  4. Question: What is the output type of XC6122C231MG-G?
    Answer: XC6122C231MG-G has an open-drain output type, which means it can be connected to other devices through a pull-up resistor to achieve different logic levels.

  5. Question: What is the typical quiescent current consumption of XC6122C231MG-G?
    Answer: The typical quiescent current consumption of XC6122C231MG-G is very low, usually around 1.0µA.

  6. Question: Can XC6122C231MG-G be used in battery-powered applications?
    Answer: Yes, XC6122C231MG-G is suitable for battery-powered applications due to its low quiescent current consumption, which helps to conserve battery life.

  7. Question: What is the accuracy of the voltage detection threshold in XC6122C231MG-G?
    Answer: The accuracy of the voltage detection threshold in XC6122C231MG-G is typically ±1.5%.

  8. Question: Can XC6122C231MG-G be used for overvoltage protection?
    Answer: No, XC6122C231MG-G is designed for undervoltage detection only. It does not provide overvoltage protection.

  9. Question: What is the temperature range of operation for XC6122C231MG-G?
    Answer: XC6122C231MG-G has an operating temperature range of -40°C to +85°C.

  10. Question: Is XC6122C231MG-G RoHS compliant?
    Answer: Yes, XC6122C231MG-G is RoHS (Restriction of Hazardous Substances) compliant, which means it meets the environmental standards set by the European Union.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.