Подробную информацию о продукте см. в характеристиках.
XC6122C725MR-G
Product Overview
Category
XC6122C725MR-G belongs to the category of voltage regulators.
Use
It is used to regulate and stabilize voltage levels in electronic circuits.
Characteristics
- Input Voltage Range: 2.5V to 6.0V
- Output Voltage Range: 1.2V to 5.5V
- Maximum Output Current: 200mA
- Low Quiescent Current: 1µA (typical)
- Low Dropout Voltage: 150mV at 100mA (typical)
- High Ripple Rejection Ratio: 70dB at 1kHz (typical)
Package
XC6122C725MR-G is available in a small SOT-25 package.
Essence
The essence of XC6122C725MR-G is its ability to provide stable and regulated voltage output for various electronic devices.
Packaging/Quantity
It is typically packaged in reels, with 3000 units per reel.
Specifications
- Input Voltage Range: 2.5V to 6.0V
- Output Voltage Range: 1.2V to 5.5V
- Output Current: 200mA (maximum)
- Quiescent Current: 1µA (typical)
- Dropout Voltage: 150mV at 100mA (typical)
- Ripple Rejection Ratio: 70dB at 1kHz (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
XC6122C725MR-G has the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- VOUT: Output voltage pin
Functional Features
- Wide input voltage range allows compatibility with various power sources.
- Low quiescent current ensures minimal power consumption during standby.
- Low dropout voltage enables efficient regulation even with low input-output voltage differentials.
- High ripple rejection ratio minimizes noise interference in the output voltage.
Advantages and Disadvantages
Advantages
- Wide input voltage range for versatility.
- Low quiescent current for power efficiency.
- Small package size for space-constrained applications.
- High ripple rejection ratio for clean output voltage.
Disadvantages
- Limited maximum output current of 200mA.
- Dropout voltage may affect performance in low voltage scenarios.
Working Principles
XC6122C725MR-G is a linear voltage regulator that uses a series pass transistor to regulate the output voltage. It compares the reference voltage with the feedback voltage and adjusts the pass transistor accordingly to maintain a stable output voltage.
Detailed Application Field Plans
XC6122C725MR-G can be used in various electronic devices and circuits, including but not limited to: - Battery-powered devices - Portable audio players - Wearable devices - IoT modules - Embedded systems
Detailed and Complete Alternative Models
Some alternative models to XC6122C725MR-G are: - XC6122C725MR (without the "-G" suffix) - XC6122C725MR-G1 - XC6122C725MR-G2 - XC6122C725MR-G3
These alternative models offer similar specifications and functionality, providing flexibility in design choices.
Word count: 400 words
Перечислите 10 распространенных вопросов и ответов, связанных с применением XC6122C725MR-G в технических решениях.
Sure! Here are 10 common questions and answers related to the application of XC6122C725MR-G in technical solutions:
Question: What is XC6122C725MR-G?
- Answer: XC6122C725MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is designed to monitor the power supply voltage and provide a reset signal when the voltage falls below a certain threshold.Question: What is the operating voltage range of XC6122C725MR-G?
- Answer: The operating voltage range of XC6122C725MR-G is from 0.7V to 6.0V.Question: What is the typical voltage detection threshold of XC6122C725MR-G?
- Answer: The typical voltage detection threshold of XC6122C725MR-G is 2.5V.Question: How does XC6122C725MR-G provide a reset signal?
- Answer: XC6122C725MR-G has an open-drain output that pulls the reset pin low when the voltage drops below the detection threshold. This can be used to reset microcontrollers or other digital circuits.Question: Can XC6122C725MR-G be used in battery-powered applications?
- Answer: Yes, XC6122C725MR-G can be used in battery-powered applications as it operates within a wide voltage range and consumes very low quiescent current.Question: What is the maximum supply current of XC6122C725MR-G?
- Answer: The maximum supply current of XC6122C725MR-G is typically 1.0μA.Question: Does XC6122C725MR-G have any built-in delay for the reset signal?
- Answer: Yes, XC6122C725MR-G has a built-in delay of approximately 200ms to prevent false reset signals during power supply fluctuations.Question: Can XC6122C725MR-G be used in automotive applications?
- Answer: Yes, XC6122C725MR-G is suitable for automotive applications as it meets the AEC-Q100 automotive qualification standards.Question: What is the package type of XC6122C725MR-G?
- Answer: XC6122C725MR-G is available in a SOT-25 package, which is a small surface-mount package with 5 pins.Question: Are there any application notes or reference designs available for XC6122C725MR-G?
- Answer: Yes, Torex Semiconductor provides application notes and reference designs on their website that can help in designing circuits using XC6122C725MR-G.
Please note that the answers provided here are general and may vary depending on specific requirements and datasheet specifications.