Torex Semiconductor Ltd
Изображение может быть репрезентативным.
Подробную информацию о продукте см. в характеристиках.
XC6123D727MR-G
Посмотреть детали Таблицы данных

XC6123D727MR-G

Product Overview

Category

XC6123D727MR-G belongs to the category of voltage regulators.

Use

It is used to regulate and stabilize voltage levels in electronic circuits.

Characteristics

  • High precision voltage regulation
  • Low dropout voltage
  • Low quiescent current
  • Thermal shutdown protection
  • Short circuit protection

Package

XC6123D727MR-G comes in a small surface mount package.

Essence

The essence of XC6123D727MR-G is to provide stable and regulated voltage output for various electronic devices.

Packaging/Quantity

XC6123D727MR-G is typically packaged in reels or tape and reel packaging, with a quantity of 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage Range: 1.2V - 5.0V
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6123D727MR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. EN: Enable pin (optional)

Functional Features

  • High precision voltage regulation ensures stable output voltage.
  • Low dropout voltage allows efficient operation even with low input voltages.
  • Low quiescent current minimizes power consumption.
  • Thermal shutdown protection prevents overheating.
  • Short circuit protection safeguards against damage during fault conditions.

Advantages and Disadvantages

Advantages

  • High precision voltage regulation
  • Low dropout voltage
  • Low quiescent current
  • Thermal and short circuit protection

Disadvantages

  • Limited input voltage range (2.5V - 6.0V)
  • Not suitable for high power applications

Working Principles

XC6123D727MR-G utilizes a combination of internal circuitry and feedback mechanisms to regulate the output voltage. It compares the reference voltage with the feedback voltage and adjusts the internal circuitry accordingly to maintain a stable output voltage.

Detailed Application Field Plans

XC6123D727MR-G is commonly used in various electronic devices, including:

  1. Mobile phones
  2. Tablets
  3. Portable media players
  4. Wearable devices
  5. IoT devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6123D727MR-G are:

  1. LM1117-3.3: A popular linear voltage regulator with similar specifications.
  2. LT1763: A low dropout voltage regulator with adjustable output voltage.
  3. TPS7A4700: A high-performance voltage regulator with ultra-low noise output.

These alternative models offer similar functionality and can be used as substitutes based on specific requirements.

Word count: 411 words

Перечислите 10 распространенных вопросов и ответов, связанных с применением XC6123D727MR-G в технических решениях.

Sure! Here are 10 common questions and answers related to the application of XC6123D727MR-G in technical solutions:

  1. Question: What is XC6123D727MR-G?
    - Answer: XC6123D727MR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.

  2. Question: What is the operating voltage range of XC6123D727MR-G?
    - Answer: The operating voltage range of XC6123D727MR-G is typically between 0.9V and 6.0V.

  3. Question: How does XC6123D727MR-G help in technical solutions?
    - Answer: XC6123D727MR-G ensures stable operation of electronic devices by monitoring the power supply voltage and generating a reset signal to prevent malfunctions caused by low voltage conditions.

  4. Question: Can XC6123D727MR-G be used in battery-powered applications?
    - Answer: Yes, XC6123D727MR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 0.5µA.

  5. Question: What is the output type of XC6123D727MR-G?
    - Answer: XC6123D727MR-G has an open-drain output type, which allows for flexibility in connecting to other devices.

  6. Question: What is the typical reset threshold voltage of XC6123D727MR-G?
    - Answer: The typical reset threshold voltage of XC6123D727MR-G is 2.7V.

  7. Question: Does XC6123D727MR-G have a built-in delay time?
    - Answer: Yes, XC6123D727MR-G has a built-in delay time of typically 200ms to ensure stable operation during power-up or voltage fluctuations.

  8. Question: Can XC6123D727MR-G be used in automotive applications?
    - Answer: Yes, XC6123D727MR-G is suitable for automotive applications as it meets the AEC-Q100 automotive qualification standards.

  9. Question: What is the package type of XC6123D727MR-G?
    - Answer: XC6123D727MR-G is available in a small SOT-25 package, which is compact and suitable for space-constrained designs.

  10. Question: Is XC6123D727MR-G RoHS compliant?
    - Answer: Yes, XC6123D727MR-G is RoHS (Restriction of Hazardous Substances) compliant, ensuring it meets environmental regulations.

Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications of XC6123D727MR-G.