Torex Semiconductor Ltd
Изображение может быть репрезентативным.
Подробную информацию о продукте см. в характеристиках.
XC6123E617ER-G
Посмотреть детали Таблицы данных

XC6123E617ER-G

Product Overview

Category

XC6123E617ER-G belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Compact size
  • High efficiency
  • Low dropout voltage
  • Wide input voltage range
  • Overcurrent protection
  • Thermal shutdown protection

Package

XC6123E617ER-G comes in a small surface-mount package.

Essence

The essence of XC6123E617ER-G lies in its ability to provide stable and regulated voltage to electronic devices.

Packaging/Quantity

It is typically packaged in reels and available in quantities of 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 1.8V
  • Output Current: 200mA
  • Dropout Voltage: 150mV (typical)
  • Quiescent Current: 30μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6123E617ER-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin

Functional Features

  • Voltage regulation: XC6123E617ER-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It safeguards the circuit by limiting the current when it exceeds a certain threshold.
  • Thermal shutdown protection: In case of excessive heat, the regulator shuts down to prevent damage.

Advantages and Disadvantages

Advantages

  • Small form factor allows for easy integration into compact designs.
  • High efficiency results in minimal power loss.
  • Wide input voltage range makes it suitable for various applications.
  • Overcurrent and thermal protection enhance reliability.

Disadvantages

  • Limited output current may not be suitable for high-power applications.
  • Fixed output voltage may restrict flexibility in certain designs.

Working Principles

XC6123E617ER-G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a constant output voltage.

Detailed Application Field Plans

XC6123E617ER-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6123E617ER-G are: - XC6206P182MR-G - LM1117IMPX-1.8/NOPB - MCP1700T-1802E/TT

These models offer similar functionality and specifications, providing options for different design requirements.

In conclusion, XC6123E617ER-G is a compact and efficient voltage regulator that offers stable voltage regulation for various electronic devices. Its wide input voltage range, overcurrent protection, and thermal shutdown features make it a reliable choice for many applications. However, its limited output current and fixed output voltage should be considered when selecting the appropriate model for specific designs.

Перечислите 10 распространенных вопросов и ответов, связанных с применением XC6123E617ER-G в технических решениях.

Sure! Here are 10 common questions and answers related to the application of XC6123E617ER-G in technical solutions:

  1. Question: What is the XC6123E617ER-G?
    Answer: The XC6123E617ER-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides an output signal when it falls below a certain threshold.

  2. Question: What is the operating voltage range of XC6123E617ER-G?
    Answer: The operating voltage range of XC6123E617ER-G is typically between 0.8V and 6.0V.

  3. Question: How does XC6123E617ER-G help in technical solutions?
    Answer: XC6123E617ER-G helps in technical solutions by providing a reliable way to monitor the power supply voltage and trigger actions or alarms when it goes out of the desired range.

  4. Question: Can XC6123E617ER-G be used in battery-powered applications?
    Answer: Yes, XC6123E617ER-G can be used in battery-powered applications as it has a low quiescent current consumption, making it suitable for power-sensitive designs.

  5. Question: What is the output configuration of XC6123E617ER-G?
    Answer: XC6123E617ER-G has an open-drain output configuration, which means it can be easily interfaced with other digital circuits or microcontrollers.

  6. Question: What is the typical accuracy of XC6123E617ER-G?
    Answer: The typical accuracy of XC6123E617ER-G is ±1.5% at room temperature.

  7. Question: Can XC6123E617ER-G be used for overvoltage protection?
    Answer: No, XC6123E617ER-G is specifically designed for undervoltage detection and does not provide overvoltage protection.

  8. Question: What is the response time of XC6123E617ER-G?
    Answer: The response time of XC6123E617ER-G is typically 200µs, allowing for quick detection of voltage drops.

  9. Question: Can XC6123E617ER-G be used in automotive applications?
    Answer: Yes, XC6123E617ER-G is AEC-Q100 qualified, making it suitable for automotive applications that require high reliability and performance.

  10. Question: Is XC6123E617ER-G available in different package options?
    Answer: Yes, XC6123E617ER-G is available in various package options, including SOT-23-5 and USP-6C, providing flexibility for different design requirements.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application guidelines provided by the manufacturer.