Torex Semiconductor Ltd
Изображение может быть репрезентативным.
Подробную информацию о продукте см. в характеристиках.
XC6124F716ER-G
Посмотреть детали Таблицы данных

XC6124F716ER-G

Product Overview

Category

XC6124F716ER-G belongs to the category of voltage regulators.

Use

It is commonly used for regulating voltage in electronic circuits.

Characteristics

  • Small size and low profile package
  • Low dropout voltage
  • High output voltage accuracy
  • Low quiescent current
  • Overcurrent protection
  • Thermal shutdown protection

Package

XC6124F716ER-G is available in a small SOT-23-5 package.

Essence

The essence of XC6124F716ER-G lies in its ability to regulate voltage efficiently and accurately in various electronic applications.

Packaging/Quantity

XC6124F716ER-G is typically packaged in reels, with 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage Range: 1.2V - 5.5V
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30μA (typical)
  • Output Current: 150mA (maximum)

Detailed Pin Configuration

XC6124F716ER-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. NC: No connection pin
  5. VOUT: Output voltage pin

Functional Features

  • Low dropout voltage ensures efficient regulation even with small input-output voltage differentials.
  • Overcurrent protection safeguards the regulator and connected components from excessive current flow.
  • Thermal shutdown protection prevents damage due to excessive heat.
  • Enable pin allows for easy control of the regulator's operation.

Advantages and Disadvantages

Advantages

  • Small size and low profile package make it suitable for space-constrained applications.
  • High output voltage accuracy ensures precise voltage regulation.
  • Low quiescent current minimizes power consumption.
  • Overcurrent and thermal shutdown protection enhance reliability.

Disadvantages

  • Limited output current capacity may restrict its use in high-power applications.
  • Narrow input voltage range may not be suitable for all voltage regulation requirements.

Working Principles

XC6124F716ER-G operates based on the principle of linear voltage regulation. It uses a feedback mechanism to maintain a stable output voltage despite variations in input voltage and load conditions. The internal circuitry adjusts the pass transistor to regulate the output voltage within the specified range.

Detailed Application Field Plans

XC6124F716ER-G finds application in various electronic devices and systems, including but not limited to: - Portable consumer electronics - Battery-powered devices - IoT devices - Wearable devices - Automotive electronics - Industrial control systems

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6124F716ER-G include: - XC6206P332MR-G - XC6220B332MR-G - XC6219B332MR-G - XC6221B332MR-G - XC6223B332MR-G - XC6224B332MR-G

These models offer similar voltage regulation capabilities and may vary in terms of package size, input/output voltage ranges, and other specifications.

Note: The content provided above is approximately 400 words. Additional information or details can be added to meet the required word count of 1100 words.

Перечислите 10 распространенных вопросов и ответов, связанных с применением XC6124F716ER-G в технических решениях.

Sure! Here are 10 common questions and answers related to the application of XC6124F716ER-G in technical solutions:

  1. Q: What is XC6124F716ER-G? A: XC6124F716ER-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Q: What is the operating voltage range of XC6124F716ER-G? A: The operating voltage range of XC6124F716ER-G is typically between 0.8V and 6.0V.

  3. Q: How does XC6124F716ER-G work? A: XC6124F716ER-G continuously monitors the input voltage and compares it with a fixed threshold voltage. When the input voltage drops below the threshold, an internal reset signal is generated.

  4. Q: What is the purpose of using XC6124F716ER-G in a technical solution? A: XC6124F716ER-G is commonly used to ensure stable operation of electronic devices by providing a reliable reset signal when the power supply voltage falls below a certain level.

  5. Q: Can XC6124F716ER-G be used in battery-powered applications? A: Yes, XC6124F716ER-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.

  6. Q: What is the output type of XC6124F716ER-G? A: XC6124F716ER-G has an open-drain output, which means it requires an external pull-up resistor to provide a logic-level output signal.

  7. Q: What is the typical accuracy of the voltage detection threshold in XC6124F716ER-G? A: The typical accuracy of the voltage detection threshold in XC6124F716ER-G is ±1.5%.

  8. Q: Can XC6124F716ER-G be used for overvoltage protection? A: No, XC6124F716ER-G is specifically designed for undervoltage detection and does not provide overvoltage protection.

  9. Q: What is the maximum operating temperature range of XC6124F716ER-G? A: The maximum operating temperature range of XC6124F716ER-G is typically -40°C to +85°C.

  10. Q: Is XC6124F716ER-G available in different package options? A: Yes, XC6124F716ER-G is available in a SOT-25 package, which is a small surface-mount package with 5 pins.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.