Torex Semiconductor Ltd
Изображение может быть репрезентативным.
Подробную информацию о продукте см. в характеристиках.
XC9236A18CER-G
Посмотреть детали Таблицы данных

XC9236A18CER-G

Product Overview

Category

XC9236A18CER-G belongs to the category of voltage regulators.

Use

It is used to regulate and stabilize voltage in electronic circuits.

Characteristics

  • High precision voltage regulation
  • Low dropout voltage
  • Low quiescent current
  • Thermal shutdown protection
  • Short circuit protection

Package

XC9236A18CER-G comes in a compact surface mount package.

Essence

The essence of XC9236A18CER-G is its ability to provide stable and regulated voltage for various electronic devices.

Packaging/Quantity

It is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 1.8V
  • Output Current: Up to 300mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC9236A18CER-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • High precision voltage regulation ensures stable output voltage.
  • Low dropout voltage allows efficient operation even with low input voltages.
  • Low quiescent current minimizes power consumption when the device is idle.
  • Thermal shutdown protection prevents damage due to excessive heat.
  • Short circuit protection safeguards the device and connected components from damage in case of a short circuit.

Advantages and Disadvantages

Advantages

  • High precision voltage regulation ensures reliable performance.
  • Low dropout voltage enables operation with low input voltages.
  • Thermal shutdown and short circuit protection enhance device safety.
  • Compact package size allows for easy integration into various electronic circuits.

Disadvantages

  • Limited output current capacity may not be suitable for high-power applications.
  • Restricted input voltage range may limit compatibility with certain systems.

Working Principles

XC9236A18CER-G operates by comparing the output voltage to a reference voltage and adjusting the internal circuitry to maintain a stable output. It utilizes a feedback mechanism to continuously monitor and regulate the output voltage, compensating for any variations in the input voltage or load conditions.

Detailed Application Field Plans

XC9236A18CER-G finds applications in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable consumer electronics - Industrial control systems - Automotive electronics - Medical equipment

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC9236A18CER-G are: - XC9236A18CDR-G - XC9236A18CMR-G - XC9236A18CNR-G - XC9236A18CWR-G

These models offer similar functionality and characteristics, providing options for different package types or additional features based on specific requirements.

Word count: 345 words

Перечислите 10 распространенных вопросов и ответов, связанных с применением XC9236A18CER-G в технических решениях.

Sure! Here are 10 common questions and answers related to the application of XC9236A18CER-G in technical solutions:

  1. Q: What is XC9236A18CER-G? A: XC9236A18CER-G is a voltage regulator IC (integrated circuit) that provides a stable output voltage for various electronic devices.

  2. Q: What is the input voltage range of XC9236A18CER-G? A: The input voltage range of XC9236A18CER-G is typically between 2.5V and 6.0V.

  3. Q: What is the output voltage of XC9236A18CER-G? A: The output voltage of XC9236A18CER-G is fixed at 1.8V.

  4. Q: What is the maximum output current of XC9236A18CER-G? A: The maximum output current of XC9236A18CER-G is typically around 300mA.

  5. Q: Can XC9236A18CER-G be used in battery-powered applications? A: Yes, XC9236A18CER-G can be used in battery-powered applications as it has low quiescent current and supports low dropout voltage.

  6. Q: Is XC9236A18CER-G suitable for automotive applications? A: Yes, XC9236A18CER-G is suitable for automotive applications as it meets the AEC-Q100 automotive qualification standards.

  7. Q: Does XC9236A18CER-G have built-in protection features? A: Yes, XC9236A18CER-G has built-in protection features such as overcurrent protection, thermal shutdown, and reverse current protection.

  8. Q: Can XC9236A18CER-G operate in a wide temperature range? A: Yes, XC9236A18CER-G can operate in a wide temperature range, typically from -40°C to +105°C.

  9. Q: What package options are available for XC9236A18CER-G? A: XC9236A18CER-G is available in various package options, including SOT-25, USP-4B05, and DFN2020-6.

  10. Q: Are there any application notes or reference designs available for XC9236A18CER-G? A: Yes, Torex Semiconductor provides application notes and reference designs for XC9236A18CER-G, which can help with the implementation of the IC in different technical solutions.

Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's documentation for XC9236A18CER-G.