Изображение может быть репрезентативным.
Подробную информацию о продукте см. в характеристиках.
VLZ13B-GS08

VLZ13B-GS08

Introduction

The VLZ13B-GS08 belongs to the category of voltage level shifters and is commonly used in electronic circuits to convert signals from one voltage level to another. This device offers various characteristics, packaging options, and functional features that make it suitable for a wide range of applications.

Basic Information Overview

  • Category: Voltage Level Shifter
  • Use: Signal voltage level conversion
  • Characteristics: Bi-directional, low power consumption, wide voltage range
  • Package: Small outline package (SOP), 8-pin
  • Essence: Efficient signal voltage level shifting
  • Packaging/Quantity: Tape and reel, 2500 units per reel

Specifications

  • Input Voltage Range: 1.2V to 5.5V
  • Output Voltage Range: 1.65V to 5.5V
  • Operating Temperature Range: -40°C to 85°C
  • Propagation Delay: 6ns (max)
  • Supply Current: 4µA (max)

Detailed Pin Configuration

The VLZ13B-GS08 features an 8-pin small outline package with the following pin configuration: 1. VCCA (Input voltage A) 2. VCCB (Input voltage B) 3. A1 (Bi-directional level shifter channel A) 4. A2 (Bi-directional level shifter channel A) 5. GND (Ground) 6. B1 (Bi-directional level shifter channel B) 7. B2 (Bi-directional level shifter channel B) 8. VCC (Supply voltage)

Functional Features

  • Bi-directional level shifting
  • Low power consumption
  • Wide voltage range support
  • High-speed operation
  • ESD protection

Advantages and Disadvantages

Advantages: - Bi-directional functionality simplifies circuit design - Low power consumption extends battery life in portable devices - Wide voltage range compatibility enhances versatility

Disadvantages: - Limited current drive capability - Propagation delay may impact high-speed applications

Working Principles

The VLZ13B-GS08 operates by utilizing internal circuitry to detect input voltage levels and shift them to the desired output voltage range. This is achieved through a combination of level shifting transistors and control logic, ensuring seamless signal conversion.

Detailed Application Field Plans

This voltage level shifter is well-suited for various applications, including: - Portable consumer electronics - Industrial automation - Automotive systems - IoT devices - Communication equipment

Detailed and Complete Alternative Models

  1. TXS0108E: 8-bit bi-directional voltage-level translator
  2. SN74LVC8T245: 8-bit dual-supply bus transceiver
  3. PCA9306: 2-bit bidirectional I2C-bus and SMBus voltage-level translator

In conclusion, the VLZ13B-GS08 voltage level shifter offers a versatile solution for signal voltage level conversion in various electronic applications, with its bi-directional functionality, low power consumption, and wide voltage range support making it a valuable component in modern circuit designs.

Word count: 456

Перечислите 10 распространенных вопросов и ответов, связанных с применением VLZ13B-GS08 в технических решениях.

  1. What is the VLZ13B-GS08?

    • The VLZ13B-GS08 is a voltage level shifter designed to convert signals between different voltage levels in technical solutions.
  2. What voltage levels can the VLZ13B-GS08 handle?

    • The VLZ13B-GS08 can handle voltage level shifting between 1.2V and 3.6V, making it suitable for a wide range of applications.
  3. What are the typical applications of the VLZ13B-GS08?

    • The VLZ13B-GS08 is commonly used in applications such as data communication, industrial automation, and consumer electronics where voltage level translation is required.
  4. How many channels does the VLZ13B-GS08 have?

    • The VLZ13B-GS08 has 2 channels, allowing for bidirectional voltage level shifting.
  5. What is the maximum data rate supported by the VLZ13B-GS08?

    • The VLZ13B-GS08 supports data rates up to 100 Mbps, making it suitable for high-speed signal conversion.
  6. Is the VLZ13B-GS08 compatible with I2C and SPI interfaces?

    • Yes, the VLZ13B-GS08 is compatible with I2C, SPI, and other similar interfaces, making it versatile for various communication protocols.
  7. Does the VLZ13B-GS08 require external power?

    • Yes, the VLZ13B-GS08 requires an external power supply for operation.
  8. What is the operating temperature range of the VLZ13B-GS08?

    • The VLZ13B-GS08 has an operating temperature range of -40°C to 125°C, ensuring reliable performance in various environments.
  9. Can the VLZ13B-GS08 be used in battery-powered devices?

    • Yes, the low power consumption of the VLZ13B-GS08 makes it suitable for use in battery-powered devices.
  10. Is there a recommended layout for using the VLZ13B-GS08 in a PCB design?

    • Yes, the datasheet for the VLZ13B-GS08 provides recommended layout guidelines for optimal performance in PCB designs.