Vishay Siliconix
Изображение может быть репрезентативным.
Подробную информацию о продукте см. в характеристиках.
2N5546JTXL01

2N5546JTXL01

Product Overview

  • Category: Transistor
  • Use: Amplification and switching in electronic circuits
  • Characteristics: High voltage, high current capability, low noise
  • Package: TO-92
  • Essence: NPN Bipolar Junction Transistor
  • Packaging/Quantity: Bulk packaging, quantity varies

Specifications

  • Type: NPN
  • Maximum Collector-Emitter Voltage (Vce): 65V
  • Maximum Collector Current (Ic): 100mA
  • Power Dissipation (Pd): 625mW
  • Transition Frequency (ft): 150MHz
  • Operating Temperature Range: -55°C to 150°C

Detailed Pin Configuration

  1. Emitter (E)
  2. Base (B)
  3. Collector (C)

Functional Features

  • High voltage and current capability
  • Low noise amplification
  • Fast switching speed
  • Wide operating temperature range

Advantages and Disadvantages

Advantages

  • Suitable for high-frequency applications
  • Low noise performance
  • Compact TO-92 package
  • Wide operating temperature range

Disadvantages

  • Limited maximum collector current compared to some alternatives
  • Relatively low power dissipation capability

Working Principles

The 2N5546JTXL01 operates as an NPN bipolar junction transistor, where the flow of current is controlled by the application of a small current at the base terminal. This controls the larger current flow between the collector and emitter terminals, allowing for amplification and switching functions in electronic circuits.

Detailed Application Field Plans

The 2N5546JTXL01 is commonly used in high-frequency amplifier circuits, audio amplifiers, signal processing circuits, and general-purpose switching applications. Its low noise characteristics make it suitable for use in sensitive signal processing equipment.

Detailed and Complete Alternative Models

  • 2N3904: A widely used general-purpose NPN transistor with similar characteristics
  • BC547: Another popular NPN transistor with comparable specifications
  • 2N4401: NPN transistor with higher current capability

This comprehensive entry provides detailed information about the 2N5546JTXL01 transistor, including its specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Перечислите 10 распространенных вопросов и ответов, связанных с применением 2N5546JTXL01 в технических решениях.

  1. What is the 2N5546JTXL01 transistor used for?

    • The 2N5546JTXL01 is a high-frequency, high-gain NPN transistor commonly used in RF amplification and oscillator circuits.

  2. What are the key specifications of the 2N5546JTXL01 transistor?

    • The 2N5546JTXL01 has a maximum collector current of 100mA, a maximum power dissipation of 350mW, and a transition frequency of 800MHz.

  3. How can I maximize the performance of the 2N5546JTXL01 in my circuit?

    • To maximize performance, ensure proper biasing, impedance matching, and minimize parasitic capacitances in the circuit design.

  4. What are some common applications of the 2N5546JTXL01 transistor?

    • Common applications include RF amplifiers, oscillators, mixers, and other high-frequency signal processing circuits.

  5. What are the typical operating conditions for the 2N5546JTXL01?

    • The 2N5546JTXL01 operates under standard conditions with a collector-emitter voltage (Vce) of 20V and a collector current (Ic) of 10mA.

  6. Are there any recommended alternative transistors to the 2N5546JTXL01?

    • Some alternative transistors with similar characteristics include the 2N5179, 2N3904, and BF199, but it's important to check for compatibility with the specific circuit requirements.

  7. What precautions should be taken when soldering the 2N5546JTXL01?

    • Use an appropriate soldering iron temperature and duration to prevent overheating the transistor, and avoid mechanical stress on the leads during soldering.

  8. Can the 2N5546JTXL01 be used in high-power applications?

    • No, the 2N5546JTXL01 is not suitable for high-power applications due to its limited power dissipation rating.

  9. How do I determine the pinout of the 2N5546JTXL01 transistor?

    • The pinout of the 2N5546JTXL01 is typically available in the datasheet, with the collector, base, and emitter pins clearly identified.

  10. Where can I find additional resources for designing with the 2N5546JTXL01?

    • Additional resources, including application notes and reference designs, can often be found on the manufacturer's website or through technical support channels.