Подробную информацию о продукте см. в характеристиках.
IRFP23N50LPBF
Product Overview
- Category: Power MOSFET
- Use: Switching and amplification in power electronics applications
- Characteristics: High voltage, low on-resistance, fast switching speed
- Package: TO-247AC
- Essence: Efficient power management
- Packaging/Quantity: Tube/50 units
Specifications
- Voltage Rating: 500V
- Current Rating: 23A
- On-Resistance: 0.19Ω
- Gate Threshold Voltage: 2-4V
- Power Dissipation: 280W
Pin Configuration
The IRFP23N50LPBF MOSFET has a standard TO-247AC package with three pins: 1. Gate (G): Input for controlling the switching operation 2. Drain (D): Output terminal for the high-voltage connection 3. Source (S): Connected to the ground or return path
Functional Features
- Fast switching speed for efficient power control
- Low on-resistance minimizes power loss
- High voltage rating suitable for various power applications
Advantages
- High efficiency in power management
- Suitable for high-power applications
- Fast switching speed reduces switching losses
Disadvantages
- Higher gate capacitance may require careful driver design
- Sensitivity to overvoltage conditions
Working Principles
The IRFP23N50LPBF operates based on the principle of field-effect transistors, where the gate voltage controls the flow of current between the drain and source terminals. When the gate voltage is applied, it creates an electric field that allows current to flow through the MOSFET.
Application Field Plans
This MOSFET is commonly used in: - Switch-mode power supplies - Motor control systems - Inverters and converters - Audio amplifiers
Alternative Models
- IRFP460: Similar voltage and current ratings
- IRFB4110: Higher current rating
- IRFP250N: Lower voltage rating
In conclusion, the IRFP23N50LPBF is a high-voltage power MOSFET designed for efficient power management in various applications, offering fast switching speed and low on-resistance. Its characteristics make it suitable for use in diverse power electronics applications, from switch-mode power supplies to motor control systems.
Word count: 294
Перечислите 10 распространенных вопросов и ответов, связанных с применением IRFP23N50LPBF в технических решениях.
What is the maximum drain-source voltage of IRFP23N50LPBF?
- The maximum drain-source voltage of IRFP23N50LPBF is 500V.
What is the continuous drain current rating of IRFP23N50LPBF?
- The continuous drain current rating of IRFP23N50LPBF is 23A.
What is the on-state resistance (RDS(on)) of IRFP23N50LPBF?
- The on-state resistance (RDS(on)) of IRFP23N50LPBF is typically 0.23 ohms.
What is the gate-source voltage (VGS) for turning on IRFP23N50LPBF?
- The gate-source voltage (VGS) required to turn on IRFP23N50LPBF is typically 10V.
Can IRFP23N50LPBF be used in high-frequency switching applications?
- Yes, IRFP23N50LPBF can be used in high-frequency switching applications due to its fast switching characteristics.
What are the typical thermal resistance values for IRFP23N50LPBF?
- The junction-to-case thermal resistance (RθJC) is typically 1.25°C/W, and the junction-to-ambient thermal resistance (RθJA) is typically 62°C/W.
Is IRFP23N50LPBF suitable for use in power supply designs?
- Yes, IRFP23N50LPBF is suitable for use in power supply designs due to its high voltage and current ratings.
What are the recommended operating temperature ranges for IRFP23N50LPBF?
- The recommended operating temperature range for IRFP23N50LPBF is -55°C to 150°C.
Does IRFP23N50LPBF require a heatsink for certain applications?
- Yes, for high-power applications or when operating at high ambient temperatures, a heatsink may be required for IRFP23N50LPBF.
Can IRFP23N50LPBF be used in automotive applications?
- Yes, IRFP23N50LPBF is suitable for use in automotive applications where high voltage and current handling capabilities are required.